New Page 7
Ventus is well-designed to make building and flying a lot of fun, it features:
High precision fiberglass fuselage with fine painting that perfectly reflects
the nice appearance of Ventus.
Nicely covered wing panel built by quality balsawood, a decal set is included
which you can personalize the design.
Wing tips in order to reduce the tendency to stall and enhance scale feelings.
Removable tailplane for easy transportation.
Clear navy blue canopy with cockpit.
An air-brake that efficiently raises control of the plane and makes landing an
easy thing to do!
The design is
also aimed to make assembly as simple as possible.
A steering set
is included to help setting up the air-brake and make it easy to use.
A retract system that makes the Ventus suitable for different flying locations.
The retract is
easy to use and is linked with the hatch door for scale features.
A 8mm-hole is pre-drilled at the nose for towing on runways.
construction inside fuselage is already prepared for tractors and thus no
further conversion is needed.
Some of the highlights:
Ventus features an air-brake which is deliberately designed to control speed
efficiently. It increases overall control of the plane and makes flying a lot of
Extremely realistic wing tips with a large degree of dihedral for steady
The air-brake linkage system is pre-built at the factory to minimize building
The wings are joined by two 3mm metal rods and a 6mm wing main tube for quick
set-up and easier transportation to and from the flying field.
The ABS air-brake is easy to install, colored in red to help greatly with
Strong and durable Polystyrene wing tips efficiently reduce your chances of
stalling and increase overall control.
The tailplane is designed for simple set up with two 3mm bolts, removed easily
to reduce the room of storage.
The tailplane can be removed easily to reduce the room of storage.
90% factory built with a complete hardware pack included to maximize your time
The retract system makes the CMPro Ventus suitable for any types of flying
conditions. To make it better – the retract is pre-installed which means no
further work is needed!
HX83-nase 3 Modify
3~6 Ch 4~7 Servos